How to remove limescale from a steam iron?
If ironing leaves brown stains on your clothes or the holes in the iron soleplate seem to be blocked… then you really need to descale the steam iron.
But with which softener? Because sometimes when you want to take off your…
photo pixabay
As descale a steam iron? If ironing leaves brown stains on your clothes or the holes in the iron soleplate seem to be blocked… then you really need to descale steam plant.
but with what softener? because sometimes when you want remove limestone for example with vinegar we risk damaging the tank of the power plant.
Thanks to our advice, discover how to descale with complete security.
What natural product to descale a steam iron
1 – Tap water
5 steps to disqualify the unit
1 – Pour water into the tank up to the recommended level.
2 – Connect the steam unit
3 – Wait for the electric iron to heat up.
4 – Direct the sole of the iron on the sink table.
5 – Turn the steam knob to the maximum.
Repeat several times until the water is clear.
2 – Mineral water
5 steps to disqualify
1 – Disconnect the iron
2 – Fill the tank 3/4 of its capacity with mineral water.
3 – Gently shake the water in the tank with circular movements.
4 – Drain the water.
5 – Repeat until clear water is obtained.
Sometimes, if the steam iron has never, or rarely, been cleaned, about 20 rinses may be necessary.
Attention
Cleaning/scaling with water should be done every 10 uses.
If you don’t rinse the iron often, the water rots, it smells bad, and stains on the clothes inevitably appear.
3 – Soda water
If the steam unit is very dirty, rinse the tank with low carbonation mineral water.
The gas in the water will more easily and safely remove limescale and mold that can settle in the water.
Finish with a final rinse in tap water.
4 – Water with vinegar
If and only if the water in your steam plant smells bad, fill the plant to the recommended level and then add a teaspoon of white vinegar.
No more!
Adding more vinegar can damage your iron.
5 – Descaling products
Most brands offer descaling products. If cleaning with water seems tedious, feel free to use them.
After all, they were tested by them.
I did not use it:
– Pure demineralized water, water from the dryer, perfumed water, rainwater or distilled water are used.
These waters are harmful to your steam iron.
They cause brown spots and premature aging of the steam iron.
– Vinegar, pure or slightly diluted
All manufacturers of steam plants specify it in their instructions: «above all do not use vinegar to get rid of limescale».
Those of you who, like us, wanted to try this method know that, by pouring white vinegar into the tank.
– Lemon juice, pure or simply diluted
Both lemon juice and vinegar will permanently damage your iron.
Cleaning the steam plant iron plate
After cleaning it with water, wipe the soleplate of the iron with a damp microfiber cloth.
If that’s not enough:
On iron still hot but unplugged, use:
– Alcohol in the home
Clean the soleplate of the iron with a cloth moistened with household alcohol.
Then wipe with a water-dampened cloth.
– Hydrogen peroxide
Wipe the soleplate with a cloth dampened with hydrogen peroxide.
Then wipe with a clean, damp cloth
– magic sponge
Moisten the sponge slightly, and then wipe the soleplate of the iron.
After each of these cleanings, wipe a cloth dampened with well-squeezed water
– Diluted white vinegar
Pass a cotton swab slightly moistened with half diluted vinegar through the holes.
Clean the holes in the soleplate
Pass a cotton swab soaked in homemade alcohol.
clean the plant
Remember to wipe the body of the control unit with a damp microfiber cloth to remove any dust.
It may interest you:
Industrial Revolution Causes and Modern Concepts
Why Fog or Fog Forms
If you want to know other articles similar to How to decalcify a steam iron you can visit the category Tips.